devel

devel@lists.centos.org

4679 discussions

Forums migration to phpbb
by Karanbir Singh 01 Oct '10

01 Oct '10

Starting a new thread... So there are a few things that need to be done with the forums : - Workable data migration path from the existing forums setup to phpbb - setup a single authentication module with its own account creation / deletion / admin interface - Migrating the wiki, bugs and www site to use the same auth mechanism. Things already done : + phpbb install and tested migration ( I am guessing this based on Marcus's last email ) Looking at the list of things that need to be done, I dont need to be or want to be involved with any of them, but am happy to project-manage if that is something which is needed. So, who's offering to do what ? Step-1 might be to check and verify that wiki/bugs/www can be migrated to using the ldap auth setup proposed for phpbb. - KB

6 15

Building or maintaining CentOS EUS releases
by carlopmart 22 Sep '10

22 Sep '10

Hi all, Would it be possible to release CentOS EUS with their respective patches like upstream vendor does?? For example two releases or one release back: 5.4 and 5.3 or 5.4 only. Why? Because for example for important bugs detected on upstream 5.5 version like this: https://bugzilla.redhat.com/show_bug.cgi?id=583218. This bug doesn't exists under 5.4 release, and IMHO, it is a very important bug (it is marked as urgent on upstream). I think it would be nice to have the possibility to choose between one version and another according to the problems that arise. Many thanks. -- CL Martinez carlopmart {at} gmail {d0t} com

4 4

Contact for Chinese work of centos.org ( AKA Lee Nathanael )
by Kevin Allen 18 Sep '10

18 Sep '10

hi Karanbir Singh and all, This is Lee Nathanael ever contacted you all through CentOS-devel mail list<http://lists.centos.org/pipermail/centos-devel/2008-August/003137.html> in 2008. Seemed too long time to contact you here becase of my busy work in Tanzania.I think it will be more helpful for the team to accept me after I gained two years experience of contributing work for other opensource software such as fedora, mybb and simplemahines. But I never forget CentOS, especially for regional site such as cn.centos.org. I hope that I could contact any one of your team member on MSN or any other IM again for my contribution work for regional site of CentOS.Thank you very much. I am looking forward to your coming. Thank you from the bottom of my heart. FYI: I am keeping online at #centos as id of nathanaellee My Contact Information: MY MSN kevinallen.us(a)msn.com My AIM kevinallen128 My Skype: kevinallen.us -- -- Yours Sincerely ----Kevin Allen

1 0

Home page missing a link to the LiveCD for CentOS 5.
by Phil Schaffner 16 Sep '10

16 Sep '10

The Subject says it all. Phil

1 0

PHP, OpenSSL and missing functions?
by Jason Gerfen 13 Sep '10

13 Sep '10

Hello, new to this list and am not sure if this is the right one to post this question to but here it is... System specifications Linux hostname 2.6.18-194.11.1.el5 #1 SMP Tue Aug 10 19:09:06 EDT 2010 i686 athlon i386 GNU/Linux CentOS-5.5 PHP 5.2.13 OpenSSL-0.9.8e According to the manual for PHP a function of PHP with SSL configured is http://php.net/manual/en/function.openssl-get-cipher-methods.php which is returning an error. PHP Fatal error: Call to undefined function openssl_get_cipher_methods() According to phpinfo() it is installed and working properly. ... './configure' ... '--with-openssl' ... ... Loaded Modules ... mod_ssl ... ... openssl OpenSSL support enabled OpenSSL Version OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 Should I report this as a bug? Perhaps its available in the i386 distribution? -- Jason Gerfen jason.gerfen(a)gmail.com ~ tomorrow ain't promised so we live for today

2 2

ltsp problem
by catchme_ani 02 Sep '10

02 Sep '10

Dear Sir, I am using CentOS5.5 and in it i am install ltsp-4 (all packages.) After that i configure it with ltspcfg command. whole things are installed successfully. But some clients are showing the error message. PCI cards should be detected automatically. ISA cards cannot be detected. Please sir give the solution, in internet i have not gotten proper solution . Please help as soon as possible. Thanks & regards, Ani.

2 1

Looking for input from EPEL
by Stephen John Smoogen 01 Sep '10

01 Sep '10

Please forgive a possible repeat post. I did not see this in the archives so was not sure if it had gotten sent. With the differences between EL-6 architectures we are finding that we need to build things for PPC or i386 that Upstream x86_64 has. Due to people not wanting to have a different RPM spec file from upstream we will end up with an x86_64 package set too.. which as the good old Fat Controller would say "causes confusion and delay". So in order to satisfy various factions we are looking at add a COST to EPEL so that it would be higher than the default 1000 (say 1100). What I would like to know is if this would affect CentOS-6, SciLin-6 or other repos so that we can deal with it now versus later. [And as much as I would like to go with repotags.. that has been seen as a non-starter.] -- Stephen J Smoogen. “The core skill of innovators is error recovery, not failure avoidance.” Randy Nelson, President of Pixar University. "We have a strategic plan. It's called doing things."" — Herb Kelleher, founder Southwest Airlines

6 9

json interface
by JohnS 01 Sep '10

01 Sep '10

Not to mix up the prior thread "Looking for input from EPEL". On Wed, 2010-09-01 at 11:57 +0100, Karanbir Singh wrote: > We are > already working towards having a public build queue that exposes a json > interface, so automating stuff around that should not be hard for anyone. --- Will there be a Public Query API for the json interface? Would you elaborate some more on it please as you say it will be a build queue. Is it workable at present (beta)? Sounds interesting, John

2 1

Loading pre-built for Red Hat kernel modules
by Ross McKerchar 20 Aug '10

20 Aug '10

Hi Guys, I have a product which requires it's own kernel module. The vendor provides pre-built kernel modules that are compiled against the stock Red Hat kernels but the product does not successfully identify and load these binary modules on my Cent OS machines. I'm in a discussion with the vendor about fixing this so that the product successfully identifies the Red Hat modules as compatible. However we're not sure if these binary modules will indeed be 100% compatible with the corresponding Cent OS kernel for any given version. The concern was that tiny differences between the kernels, say, the name of the build host, could change the address of a data structure in the kernel which the pre-built module attempts to use. Does this sound like a valid concern? Where does the attempt to provide 100% binary compatibility end? The source for these kernel modules is actually available but I am trying to avoid having to build custom modules. Thanks for your help! -ross

4 3

EOL plans for C3
by Karanbir Singh 20 Aug '10

20 Aug '10

hi Guys, CentOS-3 goes EOL in about 3 months. I was thinking we should do a couple of things for this milestone : 1) Setup and run an education campaign to inform users about this. 2) Put together some documents that clearly lay down the options that users have at this point, and going forward ( Migration options, upgrade paths, virtualised containers etc ) 3) Put together some scripts that might help people with various options from point-2. Of-course, doing some of (2) and (3) before (1) would make (1) more effective. So, at this time - is there anyone who wants to step forward to take this task up as co-ordinator and lead ? - KB

10 18

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

devel