devel

devel@lists.centos.org

2 participants
4653 discussions

RE: [CentOS] 4.5 ALB Bonding Hang on Shutdown [Bug]
by Ross S. W. Walker 31 May '07

31 May '07

> -----Original Message----- > From: centos-bounces(a)centos.org > [mailto:centos-bounces@centos.org] On Behalf Of Ross S. W. Walker > Sent: Thursday, May 31, 2007 2:31 PM > To: CentOS mailing list > Subject: [CentOS] 4.5 ALB Bonding Hang on Shutdown > > > Since I upgraded from 4.4 to 4.5 my system which has 2 sets > of ALB bonded interfaces hangs on shutdown while doing an > ifdown on these interfaces. > > Has anyone else seen this issue with 4.5 and bonding? I think I found the answer. The new version of bonding has a bug in it that doesn't restore the original mac addresses on termination and will leave the mac address on the interface it was last on. Then, as ifdown is called on each slave it will hit a slave whose mac address has changed and is a dup of the other slave and it will hang there. For some reason though if I set a programmable mac address not equal to any installed on the system on the bondX interfaces it complains the mac has changed, but it doesn't hang, so that is my interim work-around, set a unique MACADDR= on each bondX interface. -Ross ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.

2 2

dkms issue
by Akemi Yagi 28 May '07

28 May '07

Hi Daniel, We talk about dkms a couple of days ago. Then I saw this post on the dkms-devel mailing list: http://lists.us.dell.com/pipermail/dkms-devel/2007-May/000562.html I don't pretend to understand the issue discussed in there, but is this something you might need to consider? Or this is not relevant? Akemi

1 0

SRPMS for updates for RHEL5?
by John Villalovos 23 May '07

23 May '07

I'm just curious. Does anyone know where Red Hat publishes the SRPMS for the updates for RHEL5? I notice that: ftp://ftp.redhat.com/pub/redhat/linux/updates/enterprise/ doesn't have a directory for RHEL5. Just wondering if Red Hat is changing things around or not. Main reason I was interested is that I have a problem with the selinux-policy-targeted RPM which has been fixed in FC6 but I haven't seen any updates for CentOS 5 or as far as I can tell for RHEL 5. Thanks, John

3 2

Heartbeat 2.0.8 spec file patch
by Matthew Albright 22 May '07

22 May '07

To get heartbeat 2.0.8 to build successfully for me on CentOS5, I needed to add a few BuildRequires to the spec file. matt --- heartbeat.spec-orig 2007-05-21 15:45:57.000000000 -0700 +++ heartbeat.spec 2007-05-21 16:14:14.000000000 -0700 @@ -8,7 +8,7 @@ Summary: heartbeat - The Heartbeat Subsystem for High-Availability Linux Name: heartbeat Version: 2.0.8 -Release: 3%{?dist} +Release: 4%{?dist} License: GPL/LGPL URL: http://linux-ha.org/ Group: Utilities @@ -21,7 +21,7 @@ BuildPrereq: glib-devel, perl, iputils, /usr/bin/ssh, openssl-devel, libnet # libnet available from www.ultramonkey.org and others Requires: sysklogd, heartbeat-stonith = %{version}-%{release}, heartbeat-pils = %{version}-%{release} -BuildRequires: libgcrypt-devel, lm_sensors-devel, net-snmp-devel +BuildRequires: libgcrypt-devel, lm_sensors-devel, net-snmp-devel, glib2-devel, python-devel, pam-devel, gnutls-devel, curses-devel %package ldirectord Summary: Monitor daemon for maintaining high availability resources @@ -96,6 +96,10 @@ %endif %changelog +* Mon May 21 2007 Matt Albright <mattalbright(a)yahoo.com> +- added glib2-devel, python-devel, pam-devel, gnutls-devel and curses-devel as + build requirements + * Sun May 13 2007 Johnny Hughes <johnny(a)centos.org> - added net-snmp-devel as a build requirement - fixed an error in 'ipmilan.c' function 'ipmilan_set_config' that prevents

3 2

Re: [CentOS-devel] Heartbeat 2.0.8 spec file patch
by Matthew Albright 21 May '07

21 May '07

Whoops, s/curses/ncurses/g; matt --- heartbeat.spec-orig 2007-05-21 15:45:57.000000000 -0700 +++ heartbeat.spec 2007-05-21 16:31:33.000000000 -0700 @@ -8,7 +8,7 @@ Summary: heartbeat - The Heartbeat Subsystem for High-Availability Linux Name: heartbeat Version: 2.0.8 -Release: 3%{?dist} +Release: 4%{?dist} License: GPL/LGPL URL: http://linux-ha.org/ Group: Utilities @@ -21,7 +21,7 @@ BuildPrereq: glib-devel, perl, iputils, /usr/bin/ssh, openssl-devel, libnet # libnet available from www.ultramonkey.org and others Requires: sysklogd, heartbeat-stonith = %{version}-%{release}, heartbeat-pils = %{version}-%{release} -BuildRequires: libgcrypt-devel, lm_sensors-devel, net-snmp-devel +BuildRequires: libgcrypt-devel, lm_sensors-devel, net-snmp-devel, glib2-devel, python-devel, pam-devel, gnutls-devel, ncurses-devel %package ldirectord Summary: Monitor daemon for maintaining high availability resources @@ -96,6 +96,10 @@ %endif %changelog +* Mon May 21 2007 Matt Albright <mattalbright(a)yahoo.com> +- added glib2-devel, python-devel, pam-devel, gnutls-devel and ncurses-devel as + build requirements + * Sun May 13 2007 Johnny Hughes <johnny(a)centos.org> - added net-snmp-devel as a build requirement - fixed an error in 'ipmilan.c' function 'ipmilan_set_config' that prevents

1 0

auto-fixed-version-deps checking and rebuilding
by Karanbir Singh 21 May '07

21 May '07

so before I go reinvent the wheel... does anyone want to recommend a process / toolset that can check for fixed-version deps in a repository and rebuild the failing deps against a new version of the deprecated package ? eg. when a new kernel is built, I want to get a list of all the packages in the repo that depended on the older version of the kernel, and who no longer work with the newer one. If there are hooks in this tool to allow me to plumb in a auto-rebuild-into-a-testing-repo process, that would be star! The most obvious way seems to be checking the entire repo for closure and whatever fails, take some action - but that is not a really good way to check which side is failing. And it also means the new rpms need to be already in a binary format before I can run the test, so thats not going to work. What I was thinking of doing was to import the repo metadata, remove details for the package being superseded, get a before and after picture, then queue in the now-failing packages behind the new package being built. Things get even more interesting when there are a bunch of packages being built. But we can think about that later :) - KB -- Karanbir Singh : http://www.karan.org/ : 2522219@icq

2 2

CentOS 5 build scripts
by Nikolay Ulyanitsky 18 May '07

18 May '07

Karanbir Singh wrote: > there arently any, its a 2 liner for a 'for f in' loop to mkisofs, trivial. I mean scripts from http://mirror.centos.org/centos/4.5/build/distro/ (build.sh) but for CentOS5. Or there user can find documentation of full building discs process (createrepo, pkgorder, buildinstall etc)?

7 13

CentOS 5 build scripts
by Nikolay Ulyanitsky 18 May '07

18 May '07

Hi, all Where can I find scripts used for build CentOS 5 cds/dvd? -- Thanks, Nikolay

5 6

SRPMS for 4.5 updates?
by Huw Lynes 18 May '07

18 May '07

They don't appear to be on any of the mirrors.. Unless I'm missing something. Thanks, Huw -- Huw Lynes | Advanced Research Computing HEC Sysadmin | Cardiff University | 5 The Parade Tel: +44 (0) 29 20870321 | Cardiff, CF24 3AA

2 2

C5 + DL320 G2 compatibility
by Nicholas Byrne 17 May '07

17 May '07

Hi, I've been having problems installing CentOS 5 on the DL320 G2 server which uses one of those fake raid chips. I'm fairly sure it's a an LSI logic chip supporting 133 ATA x 2, with raid 0, 1 and 1+0 support and uses the megaide driver. Here are the specs for the system (though they don't specify the chip in question) - http://h18004.www1.hp.com/products/quickspecs/11512_div/11512_div.html When booting with old firmware/bios i get to the point anaconda does the drive detection and it cannot find any drives. I thought, ok old firmware i'll try updating to the firmware shipped on the 2007 release of HP firmware 7.70 CDROM (FW770.2007_0131.52.iso). Now i boot C5 up from CD and all i see is - loading vmlinuz.... loading initrd.img.... Ready!.. You cannot disabled the LSI controller in the BIOS, it appears to be the only ide controller available. I have tried a few kernel parameters such as enabling disabling apic etc but nothing got me past this point. Any ideas? Thanks Nick This e-mail is the property of Quadriga Worldwide Ltd, intended for the addressee only and confidential. Any dissemination, copying or distribution of this message or any attachments is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. Messages sent to and from Quadriga may be monitored. Quadriga cannot guarantee any message delivery method is secure or error-free. Information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. We do not accept responsibility for any errors or omissions in this message and/or attachment that arise as a result of transmission. You should carry out your own virus checks before opening any attachment. Any views or opinions presented are solely those of the author and do not necessarily represent those of Quadriga.

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

devel