devel

devel@lists.centos.org

1 participants
4619 discussions

Kickstart for Automated distro testing for CentOS
by Baptiste AGASSE 08 Apr '10

08 Apr '10

Hi all, I have read that you search for some kickstart in order to test CentOS deployments. I send you one like we use in our environment. We use it for Xen Dom0 cluster connected to ISCSI SAN. I hope this helps. Regards. ############################################################################## # # # Kickstart file for LAN cluster node. # # # ############################################################################## # # Install type ############################################################################### install cdrom text firstboot --disabled reboot # # Locale, timezone and keymap ############################################################################### lang fr_FR.UTF-8 keyboard fr-latin9 timezone --utc Europe/Paris # # Network configuration ############################################################################### ### Bond1 # Admin and VMs network interface available on "public" cluster network (bonding) network --device eth0 --onboot yes --bootproto static --ip 192.168.2.99 --netmask 255.255.255.240 --gateway 192.168.2.106 --nameserver 192.168.1.10 --hostname sirislanxen1.exemple.com network --device eth5 --onboot yes --bootproto static --ip 192.168.2.99 --netmask 255.255.255.240 --gateway 192.168.2.106 --nameserver 192.168.1.10 --hostname sirislanxen1.exemple.com ### End Bond1 ### ISCSI # SAN interfaces network --device eth1 --onboot yes --bootproto static --ip 10.1.1.51 --mtu 9000 --netmask 255.255.255.0 --hostname node1.exemple.com network --device eth2 --onboot yes --bootproto static --ip 10.1.1.52 --mtu 9000 --netmask 255.255.255.0 --hostname node1.exemple.com ### End ISCSI ### Bond0 # Cluster management interfaces (bonding) network --device eth3 --onboot yes --bootproto static --ip 10.1.0.2 --netmask 255.255.255.0 --hostname node1.exemple.com network --device eth4 --onboot yes --bootproto static --ip 10.1.0.2 --netmask 255.255.255.0 --hostname node1.exemple.com ### End bond0 # # Firewall, SELinux, services and security configuration ############################################################################### # default root password : 'foo11bar' rootpw --iscrypted $1$L.LWW5FI$kGSjEOyma9dWQA0NV/9aK1 firewall --disabled services --disabled cups,iptables,ip6tables,kudzu,netfs,xendomains,avahi-daemon,acpid services --enabled multipathd authconfig --enableshadow --enablemd5 selinux --permissive # # Disk and partition configuration ############################################################################### bootloader --location=mbr --driveorder=sda clearpart --all part /boot --fstype ext3 --size=100 part pv.5 --size=100 --grow volgroup VolGroupXen1 --pesize=32768 pv.5 logvol / --fstype ext3 --name=LogVolRoot --vgname=VolGroupXen1 --size=6000 logvol /var --fstype ext3 --name=LogVolVar --vgname=VolGroupXen1 --size=2048 logvol swap --fstype swap --name=LogVolSwap --vgname=VolGroupXen1 --size=2048 logvol /tmp --fstype ext3 --name=LogVolTmp --vgname=VolGroupXen1 --size=2048 # # Common packages for all cluster nodes ############################################################################### %packages @editors @text-internet @virtualization @core @base @network-server @clustering @french-support iscsi-initiator-utils bridge-utils device-mapper-multipath vnc-server OpenIPMI OpenIPMI-tools #yum-allowdowngrade #yum-priorities yum-security ntp luci -cadaver -gnome-applet-vm -words -coolkey -nano -autofs -pcmciautils -mtools -NetworkManager -nfs-utils -mkbootdisk -irda-utils -amtu -ypbind -smartmontools -ccid -anacron -bluez-utils -talk -system-config-cluster -ipvsadm -piranha -firstboot-tui -firstboot # # Post install script ############################################################################### %post # # Bonding configuration # ### Modprobe # Modify the modprobe.conf file echo "alias bnx2i off" >> /etc/modprobe.conf echo "alias bond0 bonding" >> /etc/modprobe.conf echo "alias bond1 bonding" >> /etc/modprobe.conf echo "options bond0 miimon=80 mode=1 primary=eth4" >> /etc/modprobe.conf echo "options bond1 miimon=80 mode=1 primary=eth0" >> /etc/modprobe.conf ### End Modprobe ### Bond0 # Create network interface config file for bond0 echo -e DEVICE=bond0\\nIPADDR=10.1.0.2\\nNETMASK=255.255.255.0\\nONBOOT=yes\\nBOOTPROTO=static\\nUSERCTL=no > /etc/sysconfig/network-scripts/ifcfg-bond0 ### End Bond0 ### Bond1 # Create network interface config file for bond1 echo -e DEVICE=bond1\\nIPADDR=192.168.2.99\\nNETMASK=255.255.255.240\\nONBOOT=yes\\nBOOTPROTO=static\\nUSERCTL=no > /etc/sysconfig/network-scripts/ifcfg-bond1 ### End Bond1 ### MTU # Add MTU configuration for ISCSI echo "MTU=9000" >> /etc/sysconfig/network-scripts/ifcfg-eth1 echo "MTU=9000" >> /etc/sysconfig/network-scripts/ifcfg-eth2 ### End MTU ### Bond0 IFACEs # Modifiy slaves network interfaces config files for bond0 (eth3, eth4) sed -i -e '/^IPADDR=*/ s/^/#/' -e '/^NETMASK=*/ s/^/#/' -e '/^NETWORK=*/ s/^/#/' -e '/^DHCPCLASS=*/ s/^/#/' /etc/sysconfig/network-scripts/ifcfg-eth3 echo -e SLAVE=yes\\nMASTER=bond0 >> /etc/sysconfig/network-scripts/ifcfg-eth3 sed -i -e '/^IPADDR=*/ s/^/#/' -e '/^NETMASK=*/ s/^/#/' -e '/^NETWORK=*/ s/^/#/' -e '/^DHCPCLASS=*/ s/^/#/' /etc/sysconfig/network-scripts/ifcfg-eth4 echo -e SLAVE=yes\\nMASTER=bond0 >> /etc/sysconfig/network-scripts/ifcfg-eth4 ### End Bond0 IFACEs ### Bond1 IFACEs # Modifiy slaves network interfaces config files for bond1 (eth0, eth5) sed -i -e '/^IPADDR=*/ s/^/#/' -e '/^NETMASK=*/ s/^/#/' -e '/^NETWORK=*/ s/^/#/' -e '/^DHCPCLASS=*/ s/^/#/' /etc/sysconfig/network-scripts/ifcfg-eth0 echo -e SLAVE=yes\\nMASTER=bond1 >> /etc/sysconfig/network-scripts/ifcfg-eth0 sed -i -e '/^IPADDR=*/ s/^/#/' -e '/^NETMASK=*/ s/^/#/' -e '/^NETWORK=*/ s/^/#/' -e '/^DHCPCLASS=*/ s/^/#/' /etc/sysconfig/network-scripts/ifcfg-eth5 echo -e SLAVE=yes\\nMASTER=bond1 >> /etc/sysconfig/network-scripts/ifcfg-eth5 ### End Bond1 IFACEs # # VLAN configuration for VMs # #### VLAN 12 echo -e DEVICE=bond1.12\\nBRIDGE=vlanbr0\\nONBOOT=yes\\nBOOTPROTO=static\\nVLAN=yes > /etc/sysconfig/network-scripts/ifcfg-bond0.12 echo -e DEVICE=vlanbr0\\nTYPE=bridge\\nONBOOT=yes\\nBOOTPROTO=static\\nSTP=off\\nDELAY=0 > /etc/sysconfig/network-scripts/ifcfg-vlanbr0 ### End VLAN 12 ### VLAN 10 echo -e DEVICE=bond1.10\\nBRIDGE=vlanbr1\\nONBOOT=yes\\nBOOTPROTO=static\\nVLAN=yes > /etc/sysconfig/network-scripts/ifcfg-bond0.10 echo -e DEVICE=vlanbr1\\nTYPE=bridge\\nONBOOT=yes\\nBOOTPROTO=static\\nSTP=off\\nDELAY=0 > /etc/sysconfig/network-scripts/ifcfg-vlanbr1 ### End VLAN 10 ### VLAN 17 echo -e DEVICE=bond1.17\\nBRIDGE=vlanbr2\\nONBOOT=yes\\nBOOTPROTO=static\\nVLAN=yes > /etc/sysconfig/network-scripts/ifcfg-bond0.17 echo -e DEVICE=vlanbr2\\nTYPE=bridge\\nONBOOT=yes\\nBOOTPROTO=static\\nSTP=off\\nDELAY=0 > /etc/sysconfig/network-scripts/ifcfg-vlanbr2 ### End VLAN 17 ### VLAN 11 echo -e DEVICE=bond1.11\\nBRIDGE=vlanbr3\\nONBOOT=yes\\nBOOTPROTO=static\\nVLAN=yes > /etc/sysconfig/network-scripts/ifcfg-bond0.11 echo -e DEVICE=vlanbr3\\nTYPE=bridge\\nONBOOT=yes\\nBOOTPROTO=static\\nSTP=off\\nDELAY=0 > /etc/sysconfig/network-scripts/ifcfg-vlanbr3 ### End VLAN 11 # # Xen configuration # # Modify xen config file to set right params for network and min memory amount for xen sed -i -e '/(network-script network-bridge)/a (network-script /bin/true)' -e '/(dom0-min-mem 256)/a (dom0-min-mem 1024)' -e '/(network-script network-bridge)/ s/^/#/' -e '/(dom0-min-mem 256)/ s/^/#/' /etc/xen/xend-config.sxp # Configure xen migration sed -i -e '/#(xend-relocation-server no)/a (xend-relocation-server yes)' -e '/#(xend-relocation-port 8002)/a (xend-relocation-port 8002)' /etc/xen/xend-config.sxp sed -i -e "/#(xend-relocation-address '')/a (xend-relocation-address '10.1.0.2')" -e '/^(xend-relocation-hosts-allow*/ s/^/#/' -e "//a (xend-relocation-hosts-allow '')" /etc/xen/xend-config.sxp ### Hosts configuration sed -i -e '/^127.0.0.1/a 127.0.0.1\tlocalhost.localdomain localhost ' -e '/^127.0.0.1/D' /etc/hosts echo 10.1.0.2 node1.exemple.com node1 >> /etc/hosts echo 10.1.0.4 node2.exemple.com node2 >> /etc/hosts echo 10.1.0.6 node3.exemple.com node3 >> /etc/hosts echo 10.1.0.8 node4.exemple.com node4 >> /etc/hosts ### End Host configuration # # EOF #####

2 1

Trouble building php4 source rpm on CentOS4
by Herman Strom 08 Apr '10

08 Apr '10

I am trying to build php4 from source rpm on CentOS4. Tests fail. Did anyone hear any problems like this? Herman Strom · Systems Administrator · INFORMS® [herman@mail ~]$ wget -c "https://content-web.rhn.redhat.com/rhn/public/NULL/php/4.3.9-3.29/SRPMS/php -4.3.9-3.29.src.rpm?__gda__=1270563240_f860090ae3ca8c76da62180ae7edfc40" --10:05:27-- https://content-web.rhn.redhat.com/rhn/public/NULL/php/4.3.9-3.29/SRPMS/php- 4.3.9-3.29.src.rpm?__gda__=1270563240_f860090ae3ca8c76da62180ae7edfc40 => `php-4.3.9-3.29.src.rpm?__gda__=1270563240_f860090ae3ca8c76da62180ae7edfc40' Resolving content-web.rhn.redhat.com... 69.192.10.169 Connecting to content-web.rhn.redhat.com|69.192.10.169|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 5,325,976 (5.1M) [application/octet-stream] 100%[==============================>] 5,325,976 224.74K/s ETA 00:00 10:05:50 (241.69 KB/s) - `php-4.3.9-3.29.src.rpm?__gda__=1270563240_f860090ae3ca8c76da62180ae7edfc40' saved [5325976/5325976] [herman@mail ~]$ ls -la php-4.3.9-3.29.src.rpm\?__gda__\=1270563240_f860090ae3ca8c76da62180ae7edfc40 -rw-rw-r-- 1 herman herman 5325976 Jan 13 12:43 php-4.3.9-3.29.src.rpm?__gda__=1270563240_f860090ae3ca8c76da62180ae7edfc40 [herman@mail ~]$ mv -v php-4.3.9-3.29.src.rpm{\?__gda__\=1270563240_f860090ae3ca8c76da62180ae7edfc4 0,} `php-4.3.9-3.29.src.rpm?__gda__=1270563240_f860090ae3ca8c76da62180ae7edfc40' -> `php-4.3.9-3.29.src.rpm' [herman@mail ~]$ rpm -vhU php-4.3.9-3.29.src.rpm 1:php ########################################### [100%] [herman@mail ~]$ cp -av src/SPECS/php{,-4.3.9-3.29}.spec `src/SPECS/php.spec' -> `src/SPECS/php-4.3.9-3.29.spec' [herman@mail ~]$ cat .rpmmacros %_topdir %(echo $HOME)/src %_tmppath %_topdir/tmp %dist el4_8 [herman@mail ~]$ vi src/SPECS/php-4.3.9-3.29.spec [herman@mail ~]$ rpmbuild -bb src/SPECS/php-4.3.9-3.29.spec Executing(%prep): /bin/sh -e /home/herman/src/tmp/rpm-tmp.992 + umask 022 + cd /home/herman/src/BUILD + cd /home/herman/src/BUILD + rm -rf php-4.3.9 + /usr/bin/gzip -dc /home/herman/src/SOURCES/php-4.3.9.tar.gz + tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd php-4.3.9 ++ /usr/bin/id -u + '[' 502 = 0 ']' ++ /usr/bin/id -u + '[' 502 = 0 ']' + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #2 (php-4.3.4-config.patch):' Patch #2 (php-4.3.4-config.patch): ... SKIP PEAR_Dependency::checkPackage() test [pear/tests/pear_dependency_checkPackage.phpt] SKIP PEAR_Dependency::checkPackageUninstall() test [pear/tests/pear_dependency_checkPackageUninstall.phpt] SKIP PEAR_Downloader::download() invalid values test [pear/tests/pear_downloader_invalid.phpt] SKIP PEAR_Downloader::download() test [pear/tests/pear_downloader_new.phpt] SKIP PEAR_Installer test: PEAR_Installer::download() (deprecated) [pear/tests/pear_downloader_old.phpt] SKIP PEAR_Error: basic test [pear/tests/pear_error.phpt] SKIP PEAR_Error: die mode [pear/tests/pear_error2.phpt] SKIP PEAR_Error: default error handling [pear/tests/pear_error3.phpt] SKIP PEAR_Error: expected errors [pear/tests/pear_error4.phpt] SKIP PEAR_Installer test #1 [pear/tests/pear_installer1.phpt] SKIP PEAR_Installer test #2 [pear/tests/pear_installer2.phpt] SKIP PEAR_Installer test #3 File Transactions [pear/tests/pear_installer3.phpt] SKIP PEAR_Installer test #4: PEAR_Installer::install() [pear/tests/pear_installer4.phpt] SKIP PEAR_Installer test #5: test directory tracking/deletion of installation [pear/tests/pear_installer5.phpt] SKIP PEAR_Packager test [pear/tests/pear_packager.phpt] SKIP PEAR_Registry [pear/tests/pear_registry.phpt] SKIP System commands tests [pear/tests/pear_system.phpt] ===================================================================== TIME END 2010-04-06 10:28:13 ===================================================================== TEST RESULT SUMMARY --------------------------------------------------------------------- Exts skipped : 55 Exts tested : 32 --------------------------------------------------------------------- Number of tests : 606 Tests skipped : 218 (36.0%) Tests warned : 0 (0.0%) Tests failed : 2 (0.3%) Tests passed : 386 (63.7%) --------------------------------------------------------------------- Time taken : 89 seconds ===================================================================== ===================================================================== FAILED TEST SUMMARY --------------------------------------------------------------------- shmop extension test [ext/shmop/tests/001.phpt] General semaphore and shared memory test [ext/sysvsem/tests/sysv.phpt] ===================================================================== make: *** [test] Error 1 + set +x >> TEST FAILURE: ../ext/shmop/tests/001.diff -- 001- shm open for create: ok 001+ shm open for create: 002- shm size is: 1024 002+ Warning: shmop_open(): unable to attach or create shared memory segment in /home/herman/src/BUILD/php-4.3.9/ext/shmop/tests/001.php on line 7 003- shm write test #1: ok 003+ failed 004- data in memory is: test #1 of the shmop() extension 005- shm open for read only: ok 006- data in memory is: test #1 of the shmop() extension 007- trying to write to a read only segment 008- shm open for read only: ok 009- shm write test #1: ok 010- data in memory is: test #1 of the shmop() extensiontest #2 append data to shared memory segment 011- deletion of shm segment: ok << ../ext/shmop/tests/001.diff result ends. >> TEST FAILURE: ../ext/sysvsem/tests/sysv.diff -- 002- Got semaphore Resource id #%i. 002+ Got semaphore Resource id #4. 003- Success aquire semaphore Resource id #%i. 003+ Success aquire semaphore Resource id #4. 004- Success to attach shared memory : %i. 004+ 005- Write var1 to shared memory. 005+ Warning: shmget() failed for key 0x2: Invalid argument in /home/herman/src/BUILD/php-4.3.9/ext/sysvsem/tests/sysv.php on line 23 006- Write var2 to shared memory. 006+ Fail to attach shared memory. 007- Read var1=Variable 1. 008- Read var2=Variable 2. 009- Semaphore Resource id #%i released. 010- Shared memory successfully removed from SysV. 011- semaphore removed successfully from SysV. 012- End. << ../ext/sysvsem/tests/sysv.diff result ends. error: Bad exit status from /home/herman/src/tmp/rpm-tmp.57805 (%check) RPM build errors: Bad exit status from /home/herman/src/tmp/rpm-tmp.57805 (%check)

1 0

kickstart cfg with kvm
by Akemi Yagi 07 Apr '10

07 Apr '10

As requested. A cfg that includes kvm. Pretty much default selections with some customization. Akemi

1 0

Desktop/Workstation GNOME/KDE DVD install kickstart
by Phil Schaffner 06 Apr '10

06 Apr '10

Per Karanbir's request on Planet CentOS, below is an anaconda-ks.cfg from an install as in the Subject: -------------------------------------------------------------------- # Kickstart file automatically generated by anaconda. install cdrom lang en_US.UTF-8 keyboard us xconfig --startxonboot network --device eth0 --bootproto dhcp rootpw --iscrypted $1$1jBzy9QU$Dtyah.fFghDGGPQPlibt10 firewall --enabled --port=22:tcp authconfig --enableshadow --enablemd5 selinux --enforcing timezone America/New_York bootloader --location=mbr --driveorder=sda --append="rhgb quiet" # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work #clearpart --linux --drives=sda #part /boot --fstype ext3 --size=100 --ondisk=sda #part pv.6 --size=0 --grow --ondisk=sda #volgroup VolGroup00 --pesize=32768 pv.6 #logvol / --fstype ext3 --name=LogVol00 --vgname=VolGroup00 --size=1024 --grow #logvol swap --fstype swap --name=LogVol01 --vgname=VolGroup00 --size=1000 --grow --maxsize=1984 %packages @office @development-libs @editors @text-internet @gnome-desktop @dialup @core @base @games @emacs @base-x @graphics @printing @kde-desktop @sound-and-video @development-tools @graphical-internet kdepim emacs device-mapper-multipath xorg-x11-server-Xnest xorg-x11-server-Xvfb kdegraphics libsane-hpaio kdemultimedia imake -sysreport

2 1

centos support for Red Hat Enterprise MRG for RHEL-5
by Christopher Snow 28 Mar '10

28 Mar '10

I too would be interested in instructions for getting MRG working with centos. Many thanks in advance, Chris

1 0

squid init script
by Roman Garifullin 19 Mar '10

19 Mar '10

Hello all! I'm sorry if I wrote wrong place, but may be your will look at my patch to /etc/init.d/squid script in CentOS 5.4. The reason to rewrite it was the need of launching two process of the squid daemon with different config while original script was unable to do this easy. Now, one who need this, will change squid's config file and /etc/sysconfig/some_new_name_of_squid and just can make a hardlink in /etc/init.d. Very simple. Sory for my bad english

2 1

squid init script
by Roman Garifullin 18 Mar '10

18 Mar '10

I'm sorry, the correct file in attachment

1 0

tomcat 5.23 help - Cannot bring up the welcome page
by testwreq wreq 15 Mar '10

15 Mar '10

Installed tomcat 5.23 from the yum install of centos5.3 and have started tomcat on port 8080 . the http://hostname:8080 shows a blank page. In a standard Tomcat distribution, the default application is located in the ROOT directory /var/lib/tomcat5/webapps: From centos installation, this directory is empty. Please help us to bring up the apache-tomcat installation page.

2 1

tzdata
by Eduardo Kaftanski 12 Mar '10

12 Mar '10

Hi, A new tzdata (tzdata-2010e-1.el5.src.rpm) was released this morning by upstream. It includes a change thats critical for chilean CentOS users, as local savings was extended due to the recent earthquake. Is it possible to recompile and release it during today? I would gladly help if you tell me how to. Many thanks, -- --- Eduardo Kaftanski ekaftan(a)gmail.com

2 2

Re: [CentOS-devel] [CentOS] drbd-kmdl packages question
by Joseph L. Casale 11 Mar '10

11 Mar '10

>> Akemi, >> Funny, there was just a thread on the extra repo's drbd packages today >> in the drbd list. Given those packages have bugs and are not really >> maintained, along with the fact of how easy it is to make rpm's directly >> from source (lacking kmod though) might it be wise to drop them? >> >> jlc > >I saw a brief discussion on this subject (maintaining drbd etc) on the >centos-devel IRC channel not long ago. Maybe this matter should be >discussed in the -devel mailing list ?? I would like to hear from >core CentOS devs. Akemi, As suggested, I am posting here to get the dev feedback, clearly having kmods is a much better solution than linbits approach, but the existing bugs will likely catch most new uses off guard. Thanks guys, jlc

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

devel