Discuss November 2007

discuss@lists.centos.org

256 participants
327 discussions

Start a nNew thread

Centos v3.3 CD 2
by Luis-Miguel Astudillo 15 Nov '11

15 Nov '11

Sorry, I have been away for a while. has anyone fixed CD2 fotr CentOS v3.3 ? -- Luis

6 7

Lingering dhclient issue
by Alfred von Campe 22 Jun '11

22 Jun '11

I recently reconfigured some CentOS 4.3 systems that were using DHCP to use static IP addresses. At the same time, the systems were moved to a new VLAN. Here is the approximate sequence of events that took place: 1. ifdown eth0 2. edit /etc/sysconfig/network-scripts/ifcfg-eth0 with static IP address 3. wait for network folks to reconfigure switch 4. ifup eth0 I may have reversed steps 1 and 2 on some of the systems. The problem was that the dhclient process didn't go away, and kept renewing the old lease. Our DHCP server is configured to contact the DNS server and update the entry for each host it serves. So the DNS entries for these systems were pointing to the old address in the old VLAN. The eth0 interface itself just kept the static IP address for which it was configured. It took me a while to figure out what was going on. My question is, what could I have done to avoid this (other than killing the dhclient process)? Is there a better way to reconfigure an interface to use a static address? I am not interested in solutions that involve using a GUI (i.e., only command line solutions). Thanks, Alfred

9 17

what pkg contains libstdc++-libc6.2-2.so.3
by Fong Vang 02 Feb '11

02 Feb '11

In CentOS 4.1/2, what package contains this library: libstdc++-libc6.2-2.so.3? I installed a couple of the compat- packages, but this library is still missing.

8 8

mod_mono on centos5?
by Dave 07 Sep '09

07 Sep '09

Hello, Does anyone have mod_mono rpm or srpm compiled for centos5? Thanks. Dave.

4 4

Reformatting a USB drive
by Todd Cary 29 Sep '08

29 Sep '08

I have a USB drive that has been formatted as NTFS. Can I reformat it? I have identified these properties about it /dev/sda1 /media/Extrnl_Bkup Not sure what to do next since the GUI will not mount a NTFS disk (expected). Todd -- Ariste Software 2200 D Street Ext Petaluma, CA 94952 (707) 773-4523

9 15

Gnumeric
by centos＠911networks.com 31 Mar '08

31 Mar '08

Hi, I am trying to install Gnumeric in CentOS 4 and I can't. It complains about quite a few dependencies failing. It suggested installing some postgresql librairies, openldap librairies... I did that, now I still get: dependencies failed: libmdb/libmdbsq/libsqlite/libxbase/libtds. Is there a yum repository that has them or a yum repository for gnumeric? I have tried Dag, he does not, he has libgda, but that has other requirements... -- Thanks

7 21

slow SMTP-AUTH
by Ugo Bellavance 05 Mar '08

05 Mar '08

Hi, I installed sendmail on a centos-4 openvz VM. I set up SMTP-AUTH and when I try to send mail using this server, there is a big delay in which my e-mail client (Mozilla Thunderbird) just hangs. The server, on the other hand, is idle at the same time. It does that no matter if I use no encryption, TLS, or SSL. When the client is 'hung' sendmail, on the server side haven't logged anything yet for this connection. Any idea? Regards, Ugo

3 6

When will CentOS 5 Plus be available?
by Mark Hull-Richter 13 Feb '08

13 Feb '08

I know that 5 isn't quite out yet, but I'm wondering how soon after 5 will 5 Plus be available? Thanks. mhr

15 24

HTB - Centos 4.4
by Adriano Frare 20 Jan '08

20 Jan '08

Dear Friends, I am using HTB version 0.85 in CENTOS 4.4 and I configurated to limit bandwidth port 80 (hhtp) and 25 (smtp), but HTB don't work. Below , show files. [root@srv001 htb]# ls -la total 36 drwxrwxrwx 2 root root 4096 Set 11 21:46 . drwxr-xr-x 11 root root 4096 Set 11 00:11 .. -rw-r--r-- 1 root root 19 Fev 12 2002 eth0 -rw-r--r-- 1 root root 89 Set 11 01:01 eth0-2:10.www -rw-r--r-- 1 root root 89 Set 11 21:40 eth0-2:20.smtp -rw-r--r-- 1 root root 84 Set 11 21:45 eth0-2:30.dfl -rw-r--r-- 1 root root 89 Set 11 21:46 eth0-2:40.www-out -rw-r--r-- 1 root root 63 Set 11 00:13 eth0-2.root [root@srv001 htb]# cat eth0 DEFAULT=30 R2Q=100 [root@srv001 htb]# cat eth0-2.root # root class containing total bandwidth RATE=512kbit BURST=15k # class for outgoing WWW traffic RATE=100kbit CEIL=100kbit BURST=15k LEAF=sfq RULE=*:80 [root@srv001 htb]# cat eth0-2:30.dfl # default class for unclassified traffic RATE=1Kbit CEIL=100kbit BURST=15k LEAF=sfq [root@srv001 htb]# cat eth0-2:20.smtp # class for outgoing SMTP traffic RATE=100kbit CEIL=100kbit BURST=15k LEAF=sfq RULE=*:25 Thanks for help. Adriano

2 3

How to size an email server to handle 5 million emails per day
by Erick Perez 04 Jan '08

04 Jan '08

I have no idea as to how to size an email server. I was approached by a customer that wanted a single server with RAID 1 disks to handle about 5 million emails a day. In general terms, what parameters should I take into account to size the hardware specs when the average email is about 10kb, the smalles email is 2kb and the largest email is about 5meg (with attachment) thanks, -- ------------------------------------------------------------ Erick Perez

14 20

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss November 2007