Discuss November 2008

discuss@lists.centos.org

252 participants
254 discussions

Start a nNew thread

Centos v3.3 CD 2
by Luis-Miguel Astudillo 15 Nov '11

15 Nov '11

Sorry, I have been away for a while. has anyone fixed CD2 fotr CentOS v3.3 ? -- Luis

6 7

Lingering dhclient issue
by Alfred von Campe 22 Jun '11

22 Jun '11

I recently reconfigured some CentOS 4.3 systems that were using DHCP to use static IP addresses. At the same time, the systems were moved to a new VLAN. Here is the approximate sequence of events that took place: 1. ifdown eth0 2. edit /etc/sysconfig/network-scripts/ifcfg-eth0 with static IP address 3. wait for network folks to reconfigure switch 4. ifup eth0 I may have reversed steps 1 and 2 on some of the systems. The problem was that the dhclient process didn't go away, and kept renewing the old lease. Our DHCP server is configured to contact the DNS server and update the entry for each host it serves. So the DNS entries for these systems were pointing to the old address in the old VLAN. The eth0 interface itself just kept the static IP address for which it was configured. It took me a while to figure out what was going on. My question is, what could I have done to avoid this (other than killing the dhclient process)? Is there a better way to reconfigure an interface to use a static address? I am not interested in solutions that involve using a GUI (i.e., only command line solutions). Thanks, Alfred

9 17

what pkg contains libstdc++-libc6.2-2.so.3
by Fong Vang 02 Feb '11

02 Feb '11

In CentOS 4.1/2, what package contains this library: libstdc++-libc6.2-2.so.3? I installed a couple of the compat- packages, but this library is still missing.

8 8

mod_mono on centos5?
by Dave 07 Sep '09

07 Sep '09

Hello, Does anyone have mod_mono rpm or srpm compiled for centos5? Thanks. Dave.

4 4

Upgrade mail server to new machine
by Thom Paine 11 May '09

11 May '09

I have an old RHEL3 box that I am upgrading to CentOS5. I picked up a new Dell Poweredge R200 to use for that. Is there an easy way to copy all the user accounts and existing mail from the old server to the new one? Thanks. -- -=/>Thom

6 7

OT: Digital Video Editor for CentOS 5.2 - Suggestions?
by Lanny Marcus 12 Feb '09

12 Feb '09

We are finally going to replace our VHS-C Camcorder, with a Digital Camcorder, tomorrow. Looking for suggestions, for Digital Video Editor to use on CentOS 5.2. Preferably, something in the CentOS or RPMForge repositories and easy to use. TIA!

15 46

Linux backup help
by Kevin Kempter 25 Dec '08

25 Dec '08

Hi All; I'm awaiting a new linux laptop that will be my primary work machine. I want to implement a strategy that allows me as easily as possible to revert back to a former state. My primary concern is a scenario where I apply system updates and it breaks something that for me is critical. I wonder if a simple rsync script would work. If so, here's what I'm thinking: 1) updates are available so I execute the rsync script which pulls any updated files from my laptop to a backup server/drive 2) apply updates 3) if something breaks (even if I can no longer login) I boot the laptop, run the rsync script in the opposite direction (push files from the backup drive to the laptop) I assume that if I were to execute step 3 above that my system would be in the exact state that it was before I ran the updates. Is this a correct assumption ? Are there better approaches ? Thanks in advance..

10 17

Sync csgfs in centos 4 with current kernel updates
by Aliet Santiesteban Sifontes 15 Dec '08

15 Dec '08

Hi list, any timeframe for the sync of csgfs in centos 4 with current kernel updates???. Best regards

2 2

Upgrading to Centos 4.7 on HP DL580G5 caused problems
by Dr Les Oswald 11 Dec '08

11 Dec '08

As part of patching a cluster which has two DL580G5 login nodes ( 4X Intel 7300 DC cpus) & 24 HP DL160G5 compute nodes ( 2x Intel 5272 DC cpus) we encountered an issue that I would like to record: I upgraded both DL580s to Centos 4.7 via yum but only rebooted one initially- this node, previously bomb-proof, started to hang randomly with no obvious messages logged to help with diagnosis. In the dmessage output I found this sequence never seem before Uhhuh. NMI received for unknown reason 20. Dazed and confused, but trying to continue Do you have a strange power saving mode enabled? Uhhuh. NMI received for unknown reason 30. Dazed and confused, but trying to continue (repeated several times) Googling revealed many different scenarios with this boot error message, some suggesting a memory error - Oh Joy, these two machines have 64GB RAM each. I then changed grub.conf to boot to the previous kernel 2.6.9-67.0.15.ELsmp instead of the updated version of 2.6.9-78.0.5.ELsmp. The boot-time error messages immediately went away and so far the systems are reliable. Has anyone an explanation or confirmation that they have seen or overcome the above issue? I should mention that the DL160 compute nodes have not exhibited this behaviour at all. Les Oswald

3 2

Mirroring Hard Drive
by Matt 08 Dec '08

08 Dec '08

I have a 500GB Sata drive about 15% used I would like to make an exact copy of too another Sata 500GB drive as a spare. That way if something happens to the one in service I can plug in the spare quickly and restore one of the weekly backups without reinstalling the entire OS and all the little tweaks of setup on this mail/web server. How do I do this? That is make an exact bootable copy of a linux drive. Its running Centos 4.6 if that matters. Matt

13 25

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss November 2008